Bilateral milling

Vertical milling of masonry and chimney blocks. Double-sided milling and calibration for the motraless processing of masonry and chimney blocks.


Give us a call:
+49 941 69682 69

Contact form

Bilateral milling

Customer benefits

  • High-quality, reproducible products due to high-grade, zero-backlash linear units for positioning the milling supports
  • Cost and space saving due to elimination of grinding water recycling (no water treatment) and special waste
  • Cost saving with reusing the dust (depending on the dust extraction used) as filler in the concrete mixture

Of wall- and chimney stones. Bilateral milling and calibrating for mortar-free processing of wall- and chimney stones running one after the other. At the infeed of the machine, adjustable,  synchronously running lateral guidances installed. Product clamping from above by means of special, height adjustable pressure rollers. Basic equipment with a milling support each right and left, in moveable execution for adaption to individual product width. Additional milling and chamfering supports can be installed subsequently. Treatment in dry mode. Available with cartridge filter or sinterlamella filter.

Technical specifications *

Average processing speed
for concrete: approx. 2-4 lin. m / Min
for lightweight concrete: approx. 2-12 lin. m / Min
*depending on product characteristics and required final result

Concrete block refinement 
creates room for creativity

The demand for diverse shapes and sophisticated surface designs, such as natural-looking stone surfaces, is constantly increasing.